Ngwa etinyere:A na-ejikarị eme ihe maka ịkpụ carbon ígwè, silicon steel, igwe anaghị agba nchara, aluminum alloy, titanium alloy, galvanized steel sheet, pickling board, aluminum zinc plate, ọla kọpa na ọtụtụ ụdị metal ihe ọnwụ na na.
Ụlọ ọrụ etinyereTinyere na nhazi mpempe akwụkwọ, ụgbọ elu, ụgbọ elu, ngwá electronic, ngwa eletriki, akụkụ ụgbọ oloko, ụgbọ ala, ígwè ọrụ, ihe ndị ziri ezi, ụgbọ mmiri, ngwá ọrụ igwe, igwe mbuli elu, ngwa ụlọ, onyinye na nka, nhazi ngwá ọrụ, ịchọ mma, mgbasa ozi, nhazi nke mba ọzọ metal dị iche iche. ụlọ ọrụ nhazi mmepụta ihe.
1.High rigidity arọ chassis, na-ebelata vibration nke a na-emepụta n'oge usoro ịkpụ ọsọ ọsọ.
2.Gantry okpukpu abụọ-drive Ọdịdị, na mbubata Germany rack & gia nnyefe usoro, nke mma mmepụta arụmọrụ.
3 okporo ụzọ ntụzịaka nke aluminom na-arụ ọrụ dị elu, mgbe nyochachara enweghị ngwụcha, nke na-eme ngwa ngwa igbutu cicular arc.
4.Open worktable, mfe ọrụ na obere ohere ọrụ.
5. High nkenke, ngwa ngwa ọsọ, warara mgbawa, kacha nta okpomọkụ emetụta mpaghara, ezigbo ịkpụ elu na ọ dịghị burr.
6. The laser ọnwụ isi adịghị abata kọntaktị na elu nke ihe na-adịghị ọkọ na workpiece.
7. The slit bụ nke kacha warara, okpomọkụ emetụta mpaghara bụ nke kasị nta, mpaghara deformation nke workpiece dị nnọọ obere, na ọ dịghị n'ibu deformation.
8.Ọ nwere nhazi nhazi dị mma, nwere ike ịhazi ụkpụrụ ọ bụla, ma nwee ike ịkpụ ọkpọkọ na profaịlụ ndị ọzọ.
9. Enwere ike ịme ihe na-adịghị mma nke na-adịghị mma na ihe ọ bụla siri ike dị ka efere ígwè, igwe anaghị agba nchara, aluminum alloy plates, na alloys siri ike.
| Nlereanya | LXF6020T |
| Dayameta kacha n'èzí nke tubes okirikiri(mm) | 20-210 (ahaziri ka ọ bụrụ 250) |
| Ọkpụrụkpụ ọkpọkọ | Dabere na ike |
| Ịcha ọsọ | Ịcha ọsọ: Max 0.8m/s / ịkpụ (dabere na ihe ọkpụrụkpụ) |
| "y" axis otu ogologo nri | 1200mm |
| oke mgbanwe axis "z". | 65mm |
| "w" axis mgbanwe nso | 360° |
| Igwe megharia n'ọnọdu ziri ezi | ± 0.05mm / 1000mm |
| Ndokwa igwe ziri ezi | ± 0.1mm |
| Igwe anaghị arụ ọrụ ọsọ | 120m/min |
| Kachasị ngwa ngwa | 1.0G-1.5G |
| Ịchọrọ ọkụ eletrik | 380V 50Hz (nwere ike ịhazi ya) |
| Ịcha izi ezi | ± 0.1mm |
| Nha igwe | 9340*1560*1615mm |
| Ibu igwe | 8T |
| Ike | 500-25000w (Nhọrọ) |
| izi ezi | ± 0.1mm |
| Max .ogologo akụrụngwa (mm) | ≤6200 |
| Oke.Ogologo akụkụ emechara (mm) | 1200 |
| Ogologo ogologo ọkpọkọ (mm) | 180 |
| Multi-arụ ọrụ ọnwụ | Miter ịkpụ, akụkụ anọ, oghere, square, okirikiri, oyi ọnụ, pụrụ iche profaịlụ |
| Ihe onwunwe | Ọkpụrụkpụ (mm) | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Mbelata ọsọ (m/min) | |||||||||||
| Carbon ígwè (O2) | 1 | 7.0-8.0 | 7.0-9.0 | 7.0-11.0 | 7.0-12.0 | 7.0-12.0 | 7.0-12.0 | 7.0-12.0 | 7.0-12.0 | 7.0-12.0 | 7.0-12.0 |
| 2 | 4.0-5.0 | 5.0-6.0 | 5.0-6.5 | 5.0-6.5 | 5.0-7.0 | 5.0-7.0 | 5.0-7.0 | 5.0-7.0 | 5.0-7.0 | 5.0-7.0 | |
| 3 | 2.0-2.5 | 2.5-3.0 | 2.8-3.8 | 3.0-4.6 | 3.5-5.0 | 3.5-5.0 | 3.5-5.0 | 3.5-5.0 | 3.5-5.0 | 3.5-5.0 | |
| 4 | 1.5-2.0 | 2.0-2.4 | 2.5-3.2 | 2.8-4.0 | 3.0-4.2 | 3.0-4.2 | 3.0-4.2 | 3.0-4.2 | 3.0-4.2 | 3.0-4.2 | |
| 5 | 1.2-1.5 | 1.5-1.8 | 1.8-2.5 | 2.2-3.2 | 2.5-3.6 | 2.5-3.6 | 2.5-3.6 | 2.5-3.6 | 2.5-3.6 | 2.5-3.6 | |
| 6 | 1.0-1.4 | 1.4-1.6 | 1.6-2.2 | 2.0-2.8 | 2.4-3.0 | 2.4-3.0 | 2.4-3.0 | 2.4-3.0 | 2.4-3.0 | 2.4-3.0 | |
| 8 | 1.0-1.2 | 1.1-1.5 | 1.4-2.0 | 1.8-2.4 | 1.8-2.4 | 1.8-2.4 | 1.8-2.4 | 1.8-2.4 | 1.8-2.4 | ||
| 10 | 0,75-0,85 | 1.0-1.2 | 1.1-1.4 | 1.2-1.8 | 1.2-1.8 | 1.2-1.8 | 1.2-1.8 | 1.2-1.8 | 1.2-1.8 | ||
| 12 | 0.6-0.7 | 0.9-1.0 | 0.9-1.2 | 1.0-1.5 | 1.0-1.5 | 1.0-1.5 | 1.0-1.5 | 1.0-1.5 | 1.0-1.5 | ||
| 16 | 0.6-0.75 | 0.7-0.85 | 0.7-0.85 | 0.7-0.85 | 0.7-0.85 | 0.7-0.85 | 0.7-0.85 | ||||
| 20 | 0.6-0.75 | 0.6-0.75 | 0.6-0.75 | 0.6-0.75 | 0.6-0.75 | 0.6-0.75 | |||||
| 22 | 0.5-0.65 | 0.5-0.65 | 0.5-0.65 | 0.5-0.65 | 0.5-0.65 | 0.5-0.65 | |||||
| 25 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | |||||
| Ihe onwunwe | Ọkpụrụkpụ (mm) | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Mbelata ọsọ (m/min) | |||||||||||
| Igwe anaghị agba nchara (N2) | 1 | 10-12 | 15-18 | 10-15 | 35-50 | 45-55 | 45-55 | 45-55 | 45-55 | 45-55 | 45-55 |
| 2 | 2-4.0 | 4.5-6.0 | 5.0-7.0 | 10-15 | 15-23 | 18-27 | 20-35 | 23-37 | 26-40 | 28-43 | |
| 3 | 0.7-2.0 | 2.0-2.4 | 3.0-4.0 | 5.0-7.0 | 7.0-11.0 | 10-15 | 15-20 | 19-24 | 23-28 | 27-32 | |
| 4 | 1.0-1.5 | 2.0-2.8 | 3.5-4.5 | 4.0-6.0 | 5.0-7.5 | 10-14 | 14-17 | 18-22 | 22-26 | ||
| 5 | 0,75-0,85 | 1.2-1.7 | 1.8-2.5 | 2.5-4.0 | 4.0-5.0 | 8.0-12.0 | 11-14 | 14-17 | 16-18 | ||
| 6 | 0.7-1.0 | 0.7-0.8 | 2.0-3.2 | 3.0-4.0 | 6.0-8.0 | 8.0-9.5 | 9.5-11.0 | 10.5-12.0 | |||
| 8 | 0.5-0.7 | 0.5-0.6 | 1.2-1.8 | 1.5-2.6 | 3.5-4.0 | 5.0-5.5 | 6.5-7.0 | 7.5-8.0 | |||
| 10 | 0.7-0.9 | 0.7-1.3 | 1.8-2.2 | 2.5-3.0 | 3.4-3.9 | 4.0-4.5 | |||||
| 12 | 0.3-0.4 | 0.4-0.6 | 1.2-1.5 | 1.8-2.1 | 2.6-3.1 | 3.3-3.6 | |||||
| 16 | 0.3-0.5 | 0.8-1.2 | 1.5-1.8 | 2.2-2.5 | 2.7-3.0 | ||||||
| 20 | 0.3-0.5 | 0.6-0.8 | 1.0-1.3 | 1.7-2.0 | 2.2-2.5 | ||||||
| 22 | 0.3-0.4 | 0.6-0.75 | 1.0-1.2 | 1.4-1.6 | |||||||
| 25 | 0.3-0.5 | 0.4-0.6 | 0.6-0.8 | ||||||||
| Ihe onwunwe | Ọkpụrụkpụ (mm) | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Mbelata ọsọ (m/min) | |||||||||||
| Aluminom (N2) | 1 | 10-15 | 30-45 | 30-38 | 35-40 | 45-55 | 45-55 | 45-55 | 45-55 | ||
| 2 | 5.0-6.0 | 10-15 | 12-16 | 13-22 | 20-30 | 27-35 | 33-40 | 36-43 | |||
| 3 | 2.5-3.5 | 5.0-7.0 | 6.5-8.0 | 7.0-13 | 13-18 | 15-18 | 18-22 | 23-26 | |||
| 4 | 1.4-2.0 | 3.5-5.0 | 3.5-5.0 | 4.0-5.5 | 10-12 | 12-13.5 | 15-18 | 19-22 | |||
| 5 | 0.8-1.0 | 2.0-3.0 | 2.5-3.5 | 3.4-4.0 | 5.0-8.0 | 9.0-12 | 14-16 | 17-19 | |||
| 6 | 0.5-0.6 | 1.5-2.0 | 1.8-3.0 | 2.2-3.5 | 4.0-6.0 | 7.5-9.5 | 10-12.5 | 13-15 | |||
| 8 | 0.5-0.6 | 0.9-1.3 | 0.9-1.6 | 2.0-3.0 | 4.0-4.8 | 5.8-6.5 | 6.8-7.2 | ||||
| 10 | 0.4-0.7 | 0.55-1.0 | 1.0-1.9 | 1.5-2.7 | 3.0-3.8 | 3.7-4.2 | |||||
| 12 | 0.3-0.45 | 0.4-0.6 | 0.8-1.4 | 1.6-1.9 | 2.4-2.7 | 3.3-3.6 | |||||
| 16 | 0.3-0.4 | 0.6-0.9 | 1.0-1.2 | 1.4-1.6 | 1.7-1.8 | ||||||
| 20 | 0.4-0.6 | 0.8-0.9 | 1.0-1.2 | 1.2-1.6 | |||||||
| 22 | 0.7-0.85 | 0.9-1.0 | 1.1-1.2 | ||||||||
| 25 | 0.35-0.45 | 0.6-0.7 | 0.8-0.9 | ||||||||
| Ihe onwunwe | Ọkpụrụkpụ (mm) | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Mbelata ọsọ (m/min) | |||||||||||
| Brass (N2) | 1 | 8.0-12 | 12-18 | 20-32 | 25-30 | 45-55 | 45-55 | 45-55 | 45-55 | ||
| 2 | 3.5-5.0 | 6.0-8.5 | 9.0-11 | 10-13 | 25-35 | 27-35 | 33-40 | 36-43 | |||
| 3 | 1.5-2.2 | 2.5-4.0 | 4.0-6.0 | 5.0-6.5 | 12-18 | 15-18 | 18-22 | 23-26 | |||
| 4 | 1.0-1.2 | 1.5-1.8 | 3.0-4.5 | 3.0-5.2 | 8.0-10 | 12-13.5 | 15-18 | 19-22 | |||
| 5 | 0.6-0.8 | 0.8-1.2 | 1.5-2.0 | 2.0-3.0 | 4.5-6.0 | 9.0-12 | 14-16 | 17-19 | |||
| 6 | 0.4-0.5 | 1.0-1.6 | 1.4-2.0 | 3.0-4.0 | 7.5-9.5 | 10-12.5 | 13-15 | ||||
| 8 | 0.5-0.6 | 0.7-0.8 | 1.6-2.2 | 4.0-4.8 | 5.8-6.5 | 6.8-7.2 | |||||
| 10 | 0.2-0.3 | 0.8-1.2 | 1.5-2.7 | 3.0-3.8 | 3.7-4.2 | ||||||
| 12 | 1.6-1.9 | 2.4-2.7 | 3.3-3.6 | ||||||||
 |  |  |
| Exchange table fiber optic tube cutter fiber tube cutter fiber laser tube ọnwụ | Exchange table Full mkpuchi eriri laser ọnwụ igwe | Ngwakọ laser agwakọta laser ọnwụ igwe Fiber |
 |  |  |
| Elu nkenke metal carbon ígwè | Big Power thick metal plate cnc fiber | Mpempe akwụkwọ ọla na-ekpo ọkụ |
GỤKWUO GBASARA YA>>>>
Kpọtụrụ anyị>>>>
Ngwa etinyere:A na-ejikarị eme ihe maka ịkpụ carbon ígwè, silicon steel, igwe anaghị agba nchara, aluminum alloy, titanium alloy, galvanized steel sheet, pickling board, aluminum zinc plate, ọla kọpa na ọtụtụ ụdị metal ihe ọnwụ na na.
Ụlọ ọrụ etinyereTinyere na nhazi mpempe akwụkwọ, ụgbọ elu, ụgbọ elu, ngwá electronic, ngwa eletriki, akụkụ ụgbọ oloko, ụgbọ ala, ígwè ọrụ, ihe ndị ziri ezi, ụgbọ mmiri, ngwá ọrụ igwe, igwe mbuli elu, ngwa ụlọ, onyinye na nka, nhazi ngwá ọrụ, ịchọ mma, mgbasa ozi, nhazi nke mba ọzọ metal dị iche iche. ụlọ ọrụ nhazi mmepụta ihe.
1.High rigidity arọ chassis, na-ebelata vibration nke a na-emepụta n'oge usoro ịkpụ ọsọ ọsọ.
2.Gantry okpukpu abụọ-drive Ọdịdị, na mbubata Germany rack & gia nnyefe usoro, nke mma mmepụta arụmọrụ.
3 okporo ụzọ ntụzịaka nke aluminom na-arụ ọrụ dị elu, mgbe nyochachara enweghị ngwụcha, nke na-eme ngwa ngwa igbutu cicular arc.
4.Open worktable, mfe ọrụ na obere ohere ọrụ.
5. High nkenke, ngwa ngwa ọsọ, warara mgbawa, kacha nta okpomọkụ emetụta mpaghara, ezigbo ịkpụ elu na ọ dịghị burr.
6. The laser ọnwụ isi adịghị abata kọntaktị na elu nke ihe na-adịghị ọkọ na workpiece.
7. The slit bụ nke kacha warara, okpomọkụ emetụta mpaghara bụ nke kasị nta, mpaghara deformation nke workpiece dị nnọọ obere, na ọ dịghị n'ibu deformation.
8.Ọ nwere nhazi nhazi dị mma, nwere ike ịhazi ụkpụrụ ọ bụla, ma nwee ike ịkpụ ọkpọkọ na profaịlụ ndị ọzọ.
9. Enwere ike ịme ihe na-adịghị mma nke na-adịghị mma na ihe ọ bụla siri ike dị ka efere ígwè, igwe anaghị agba nchara, aluminum alloy plates, na alloys siri ike.
| Nlereanya | LXF6020T |
| Dayameta kacha n'èzí nke tubes okirikiri(mm) | 20-210 (ahaziri ka ọ bụrụ 250) |
| Ọkpụrụkpụ ọkpọkọ | Dabere na ike |
| Ịcha ọsọ | Ịcha ọsọ: Max 0.8m/s / ịkpụ (dabere na ihe ọkpụrụkpụ) |
| Axis “y” ogologo nri otu | 1200mm |
| Oke mgbanwe axis “z”. | 65mm |
| Oke mgbanwe axis “w”. | 360° |
| Igwe megharia n'ọnọdu ziri ezi | ± 0.05mm / 1000mm |
| Ndokwa igwe ziri ezi | ± 0.1mm |
| Igwe anaghị arụ ọrụ ọsọ | 120m/min |
| Kachasị ngwa ngwa | 1.0G-1.5G |
| Ịchọrọ ọkụ eletrik | 380V 50Hz (nwere ike ịhazi ya) |
| Ịcha izi ezi | ± 0.1mm |
| Nha igwe | 9340*1560*1615mm |
| Ibu igwe | 8T |
| Ike | 500-25000w (Nhọrọ) |
| izi ezi | ± 0.1mm |
| Max .ogologo akụrụngwa (mm) | ≤6200 |
| Oke.Ogologo akụkụ emechara (mm) | 1200 |
| Ogologo ogologo ọkpọkọ (mm) | 180 |
| Multi-arụ ọrụ ọnwụ | Miter ịkpụ, akụkụ anọ, oghere, square, okirikiri, oyi ọnụ, pụrụ iche profaịlụ |
| | |
| Exchange table fiber optic tube cutter fiber tube cutter fiber laser tube ọnwụ | Exchange table Full mkpuchi eriri laser ọnwụ igwe | Ngwakọ laser agwakọta laser ọnwụ igwe Fiber |
| | |
| Elu nkenke metal carbon ígwè | Big Power thick metal plate cnc fiber | Mpempe akwụkwọ ọla na-ekpo ọkụ |
GỤKWUO GBASARA YA>>>>
Kpọtụrụ anyị>>>>