Deunyddiau Cymhwysol a Diwydiant:
Pen torri ffibr (Deunydd Metel):
Defnyddir yn bennaf ar gyfer torri dur carbon, dur silicon, dur di-staen, aloi alwminiwm, aloi titaniwm, dalen ddur galfanedig, bwrdd piclo, plât sinc alwminiwm, copr a llawer o fathau o dorri deunyddiau metel ac yn y blaen.
Pen torri ffibr (Diwydiannau Metel):
Cymhwysol mewn prosesu metel dalen, hedfan, hedfan gofod, electroneg, offer trydanol, rhannau isffordd, ceir, peiriannau, cydrannau manwl, llongau, offer metelegol, elevator, offer cartref, anrhegion a chrefftau, prosesu offer, addurno, hysbysebu, prosesu metel tramor amrywiol diwydiannau prosesu gweithgynhyrchu.
Pen torri CO2 (Deunydd Nonmetal):
Pren, bambŵ, articale jâd, carreg (dim ond ysgythru y gall), gwydr organig, grisial (dim ond ysgythru y gall), rwber, plastig, brethyn, lledr, ac ati.
Pen torri CO2 (Diwydiannau Nonmetal):
1. Hysbysebu: hysbysfwrdd, logo, arwydd, torri cymeriadau 3D, torri acrylig, sianel LED / neon, toriad twll llythrennol, llwydni blwch golau, stamp, llwydni, sêl, ac ati
2.Woodworking: MDF, llwydni pren, planciau pren, bambŵ, bwrdd dwysedd
3.Decoration: acrylig, gwydr organig, bwrdd lliw dwbl, cragen cnau coco, corn ych, bwrdd ABS, cysgod lamp, crefftau, grisial, gwydr, cerameg, carreg, cotio metel, ac ati.
4.Dillad: lledr, brethyn, texitle, esgidiau, ffabrig, ac ati.
1. Ansawdd Llwybr Ardderchog:Dot laser llai ac effeithlonrwydd gwaith uchel, o ansawdd uchel.
2. Cyflymder torri uchel:cyflymder torri yn 2-3 gwaith na'r un pŵer CO2 peiriant torri laser.
3. Rhedeg sefydlog:mabwysiadu laserau ffibr mewnforio byd uchaf, perfformiad sefydlog, gall rhannau allweddol gyrraedd 100,000 o oriau;
4. Effeithlonrwydd Uchel ar gyfer trosi ffotodrydanol:Cymharwch â pheiriant torri laser CO2, mae gan beiriant torri laser ffibr dair gwaith effeithlonrwydd trosi ffotodrydanol.
5. Cost Isel:Arbed ynni a diogelu'r amgylchedd.Mae cyfradd trosi ffotodrydanol hyd at 25-30%.Defnydd pŵer trydan isel, dim ond tua 20% -30% o beiriant torri laser CO2 traddodiadol ydyw.
6. Cynnal a Chadw Isel:trosglwyddo llinell ffibr dim angen adlewyrchu lens, arbed costau cynnal a chadw;
7. Gweithrediadau Hawdd:trosglwyddiad llinell ffibr, dim addasiad i'r llwybr optegol.
8.Mae'n cynnwys pen torri laser ffibr a phen torri laser CO2, mae'n ddewis da os oes gan eich deunyddiau gwaith fetel a nonmetal.
| 1 | Enw Peiriant | Peiriant torri laser ffibr |
| 2 | Model | LXF1325LC |
| 3 | Ardal torri peiriant laser | 2500x1300mm |
| 4 | Pŵer Laser Fiber Laser PowerCO2 | 500w/750w/1000W60/80/100/130/150/280/300W |
| 5 | Hyd tonnau laser | 1080nm |
| 6 | System drosglwyddo | Sgriw pêl wedi'i fewnforio |
| 7 | Cywirdeb lleoliad echel XY | ±0.01mm |
| 8 | Echel XY ailadrodd cywirdeb lleoliad | ±0.01mm |
| 9 | Cyflymder symud uchaf echel XY | 30m/munud |
| 10 | Cyflymder torri uchaf | 1--16m/munud |
| 11 | Torri trwch | Trwch metel mwyaf: Dur di-staen: 0.2-3mm Dur carbon: 0.2-12mm Trwch anfetel: Acrylig: 40mm pren haenog: 15mmMDF: 18mm (Yn ôl Pŵer manwl, rhestr dorri ynghlwm a ganlyn) |
| 12 | Deunydd Cais | Ffibr: Taflen fetel CO2: Nonmetal: Pren / MDF / Acrylig / Carreg ac ati. |
| 13 | Manteision | Ffibr ychwanegu arddull CO2 |
| 14 | Pwysau gros | 2200KG (Yn ôl cyfluniad manwl) |
| 15 | Pwysau net | 1800KG (Yn ôl cyfluniad manwl) |
| 16 | Maint peiriant | 4160 * 2190 * 1980mm (Yn ôl cyfluniad manwl) |
| Deunydd | trwch mm | 80W | 100W | 130W | 150W | ||||
| Cyflymder: mm/s | |||||||||
| Acrylig | 3 | 20-25 | 25-30 | 30-35 | 35-40 | ||||
| 5 | 8-12 | 10-15 | 12-17 | 15-21 | |||||
| 8 | 5-9 | 6-10 | 8-12 | 10-15 | |||||
| 10 | 3-6 | 4-7 | 5-8 | 7-11 | |||||
| 15 | 1.5-3 | 2-4 | 3-5 | 4-7 | |||||
| 20 | 0.5-1.5 | 0.7-2 | 1-3 | 1.5-4 | |||||
| 25 | 0.2-0.5 | 0.3-0.8 | 0.41 | 0.8-1.8 | |||||
| 30 | / | 0.3 | 0.3-0.5 | 0.5-0.8 | |||||
| 35 | / | / | 0.2 | 0.1-0.4 | |||||
| 40 | / | / | / | 0.1 | |||||
| MDF | 3 | 15-20 | 18-23 | 20-25 | 25-30 | ||||
| 5 | 10-13 | 10-15 | 15-18 | 18-21 | |||||
| 10 | 3.5-5 | 5-7 | 6-9 | 9-12 | |||||
| 15 | / | 2.5 | 3-4 | 5.5-7 | |||||
| 18 | / | / | / | 4 | |||||
| Pren haenog | 3 | 18-20 | 20-25 | 28-30 | 33-35 | ||||
| 5 | 10-15 | 18-20 | 22-25 | 28-30 | |||||
| 10 | 6-8 | 10-12 | 13-15 | 17-20 | |||||
| 15 | 5-8 | 8-11 | 13-15 | ||||||
| Lledr | 1 | 25 | 25-30 | 35-40 | 40-45 | ||||
| Deunydd | Trwch （mm） | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Cyflymder Torri (m/mun) | |||||||||||
| Dur Carbon (O2) | 1 | 7.0 ~ 8.0 | 7.0 ~ 9.0 | 7.0 ~ 11.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 | 7.0 ~ 12.0 |
| 2 | 4.0 ~ 5.0 | 5.0 ~ 6.0 | 5.0 ~ 6.5 | 5.0 ~ 6.5 | 5.0 ~ 7.0 | 5.0 ~ 7.0 | 5.0 ~ 7.0 | 5.0 ~ 7.0 | 5.0 ~ 7.0 | 5.0 ~ 7.0 | |
| 3 | 2.0 ~ 2.5 | 2.5 ~ 3.0 | 2.8 ~ 3.8 | 3.0 ~ 4.6 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | |
| 4 | 1.5 ~ 2.0 | 2.0 ~ 2.4 | 2.5 ~ 3.2 | 2.8 ~ 4.0 | 3.0 ~ 4.2 | 3.0 ~ 4.2 | 3.0 ~ 4.2 | 3.0 ~ 4.2 | 3.0 ~ 4.2 | 3.0 ~ 4.2 | |
| 5 | 1.2 ~ 1.5 | 1.5 ~ 1.8 | 1.8 ~ 2.5 | 2.2 ~ 3.2 | 2.5 ~ 3.6 | 2.5 ~ 3.6 | 2.5 ~ 3.6 | 2.5 ~ 3.6 | 2.5 ~ 3.6 | 2.5 ~ 3.6 | |
| 6 | 1.0 ~ 1.4 | 1.4 ~ 1.6 | 1.6 ~ 2.2 | 2.0 ~ 2.8 | 2.4 ~ 3.0 | 2.4 ~ 3.0 | 2.4 ~ 3.0 | 2.4 ~ 3.0 | 2.4 ~ 3.0 | 2.4 ~ 3.0 | |
| 8 | 1.0 ~ 1.2 | 1.1 ~ 1.5 | 1.4 ~ 2.0 | 1.8 ~ 2.4 | 1.8 ~ 2.4 | 1.8 ~ 2.4 | 1.8 ~ 2.4 | 1.8 ~ 2.4 | 1.8 ~ 2.4 | ||
| 10 | 0.75~0.85 | 1.0 ~ 1.2 | 1.1 ~ 1.4 | 1.2 ~ 1.8 | 1.2 ~ 1.8 | 1.2 ~ 1.8 | 1.2 ~ 1.8 | 1.2 ~ 1.8 | 1.2 ~ 1.8 | ||
| 12 | 0.6 ~ 0.7 | 0.9 ~ 1.0 | 0.9 ~ 1.2 | 1.0 ~ 1.5 | 1.0 ~ 1.5 | 1.0 ~ 1.5 | 1.0 ~ 1.5 | 1.0 ~ 1.5 | 1.0 ~ 1.5 | ||
| 16 | 0.6~0.75 | 0.7 ~ 0.85 | 0.7 ~ 0.85 | 0.7 ~ 0.85 | 0.7 ~ 0.85 | 0.7 ~ 0.85 | 0.7 ~ 0.85 | ||||
| 20 | 0.6~0.75 | 0.6~0.75 | 0.6~0.75 | 0.6~0.75 | 0.6~0.75 | 0.6~0.75 | |||||
| 22 | 0.5 ~ 0.65 | 0.5 ~ 0.65 | 0.5 ~ 0.65 | 0.5 ~ 0.65 | 0.5 ~ 0.65 | 0.5 ~ 0.65 | |||||
| 25 | 0.4 ~ 0.6 | 0.4 ~ 0.6 | 0.4 ~ 0.6 | 0.4 ~ 0.6 | 0.4 ~ 0.6 | 0.4 ~ 0.6 | |||||
| Deunydd | Trwch （mm） | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Cyflymder Torri (m/mun) | |||||||||||
| Dur Di-staen (N2) | 1 | 10 ~ 12 | 15 ~ 18 | 10~15 | 35 ~ 50 | 45~55 | 45~55 | 45~55 | 45~55 | 45~55 | 45~55 |
| 2 | 2 ~ 4.0 | 4.5 ~ 6.0 | 5.0 ~ 7.0 | 10~15 | 15~23 | 18~27 | 20 ~ 35 | 23 ~ 37 | 26 ~ 40 | 28 ~ 43 | |
| 3 | 0.7 ~ 2.0 | 2.0 ~ 2.4 | 3.0 ~ 4.0 | 5.0 ~ 7.0 | 7.0 ~ 11.0 | 10~15 | 15 ~ 20 | 19 ~24 | 23 ~ 28 | 27 ~32 | |
| 4 | 1.0 ~ 1.5 | 2.0 ~ 2.8 | 3.5 ~ 4.5 | 4.0 ~ 6.0 | 5.0 ~ 7.5 | 10~14 | 14~17 | 18~22 | 22 ~ 26 | ||
| 5 | 0.75~0.85 | 1.2 ~ 1.7 | 1.8 ~ 2.5 | 2.5 ~ 4.0 | 4.0 ~ 5.0 | 8.0 ~ 12.0 | 11 ~ 14 | 14~17 | 16 ~ 18 | ||
| 6 | 0.7 ~ 1.0 | 0.7 ~ 0.8 | 2.0 ~ 3.2 | 3.0 ~ 4.0 | 6.0 ~ 8.0 | 8.0 ~ 9.5 | 9.5 ~ 11.0 | 10.5 ~ 12.0 | |||
| 8 | 0.5 ~ 0.7 | 0.5 ~ 0.6 | 1.2 ~ 1.8 | 1.5 ~ 2.6 | 3.5 ~ 4.0 | 5.0 ~ 5.5 | 6.5 ~ 7.0 | 7.5 ~ 8.0 | |||
| 10 | 0.7 ~ 0.9 | 0.7 ~ 1.3 | 1.8 ~ 2.2 | 2.5 ~ 3.0 | 3.4 ~ 3.9 | 4.0 ~ 4.5 | |||||
| 12 | 0.3 ~ 0.4 | 0.4 ~ 0.6 | 1.2 ~ 1.5 | 1.8 ~ 2.1 | 2.6~3.1 | 3.3 ~ 3.6 | |||||
| 16 | 0.3 ~ 0.5 | 0.8 ~ 1.2 | 1.5 ~ 1.8 | 2.2 ~ 2.5 | 2.7 ~ 3.0 | ||||||
| 20 | 0.3 ~ 0.5 | 0.6 ~ 0.8 | 1.0 ~ 1.3 | 1.7 ~ 2.0 | 2.2 ~ 2.5 | ||||||
| 22 | 0.3 ~ 0.4 | 0.6~0.75 | 1.0 ~ 1.2 | 1.4 ~ 1.6 | |||||||
| 25 | 0.3 ~ 0.5 | 0.4 ~ 0.6 | 0.6 ~ 0.8 | ||||||||
| Deunydd | Trwch （mm） | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Cyflymder Torri (m/mun) | |||||||||||
| Alwminiwm (N2) | 1 | 10~15 | 30 ~ 45 | 30~38 | 35 ~ 40 | 45~55 | 45~55 | 45~55 | 45~55 | ||
| 2 | 5.0 ~ 6.0 | 10~15 | 12 ~ 16 | 13~22 | 20 ~ 30 | 27~35 | 33 ~ 40 | 36~43 | |||
| 3 | 2.5 ~ 3.5 | 5.0 ~ 7.0 | 6.5 ~ 8.0 | 7.0 ~ 13 | 13 ~ 18 | 15 ~ 18 | 18~22 | 23 ~ 26 | |||
| 4 | 1.4 ~ 2.0 | 3.5 ~ 5.0 | 3.5 ~ 5.0 | 4.0 ~ 5.5 | 10 ~ 12 | 12 ~ 13.5 | 15 ~ 18 | 19 ~22 | |||
| 5 | 0.8 ~ 1.0 | 2.0 ~ 3.0 | 2.5 ~ 3.5 | 3.4 ~ 4.0 | 5.0 ~ 8.0 | 9.0 ~ 12 | 14~16 | 17 ~ 19 | |||
| 6 | 0.5 ~ 0.6 | 1.5 ~ 2.0 | 1.8 ~ 3.0 | 2.2 ~ 3.5 | 4.0 ~ 6.0 | 7.5 ~ 9.5 | 10 ~ 12.5 | 13 ~ 15 | |||
| 8 | 0.5 ~ 0.6 | 0.9 ~ 1.3 | 0.9 ~ 1.6 | 2.0 ~ 3.0 | 4.0 ~ 4.8 | 5.8 ~ 6.5 | 6.8 ~ 7.2 | ||||
| 10 | 0.4 ~ 0.7 | 0.55 ~ 1.0 | 1.0 ~ 1.9 | 1.5 ~ 2.7 | 3.0 ~ 3.8 | 3.7 ~ 4.2 | |||||
| 12 | 0.3 ~ 0.45 | 0.4 ~ 0.6 | 0.8 ~ 1.4 | 1.6 ~ 1.9 | 2.4 ~ 2.7 | 3.3 ~ 3.6 | |||||
| 16 | 0.3 ~ 0.4 | 0.6 ~ 0.9 | 1.0 ~ 1.2 | 1.4 ~ 1.6 | 1.7 ~ 1.8 | ||||||
| 20 | 0.4 ~ 0.6 | 0.8 ~ 0.9 | 1.0 ~ 1.2 | 1.2 ~ 1.6 | |||||||
| 22 | 0.7 ~ 0.85 | 0.9 ~ 1.0 | 1.1 ~ 1.2 | ||||||||
| 25 | 0.35~0.45 | 0.6 ~ 0.7 | 0.8 ~ 0.9 | ||||||||
| Deunydd | Trwch （mm） | 500W | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W | 8000W | 10000W | 12000W |
| Cyflymder Torri (m/mun) | |||||||||||
| Pres (N2) | 1 | 8.0 ~ 12 | 12 ~ 18 | 20 ~ 32 | 25 ~ 30 | 45~55 | 45~55 | 45~55 | 45~55 | ||
| 2 | 3.5 ~ 5.0 | 6.0 ~ 8.5 | 9.0~11 | 10 ~ 13 | 25 ~ 35 | 27~35 | 33 ~ 40 | 36~43 | |||
| 3 | 1.5 ~ 2.2 | 2.5 ~ 4.0 | 4.0 ~ 6.0 | 5.0 ~ 6.5 | 12 ~ 18 | 15 ~ 18 | 18~22 | 23 ~ 26 | |||
| 4 | 1.0 ~ 1.2 | 1.5 ~ 1.8 | 3.0 ~ 4.5 | 3.0 ~ 5.2 | 8.0~10 | 12 ~ 13.5 | 15 ~ 18 | 19 ~22 | |||
| 5 | 0.6 ~ 0.8 | 0.8 ~ 1.2 | 1.5 ~ 2.0 | 2.0 ~ 3.0 | 4.5 ~ 6.0 | 9.0 ~ 12 | 14~16 | 17 ~ 19 | |||
| 6 | 0.4 ~ 0.5 | 1.0 ~ 1.6 | 1.4 ~ 2.0 | 3.0 ~ 4.0 | 7.5 ~ 9.5 | 10 ~ 12.5 | 13 ~ 15 | ||||
| 8 | 0.5 ~ 0.6 | 0.7 ~ 0.8 | 1.6 ~ 2.2 | 4.0 ~ 4.8 | 5.8 ~ 6.5 | 6.8 ~ 7.2 | |||||
| 10 | 0.2 ~ 0.3 | 0.8 ~ 1.2 | 1.5 ~ 2.7 | 3.0 ~ 3.8 | 3.7 ~ 4.2 | ||||||
| 12 | 1.6 ~ 1.9 | 2.4 ~ 2.7 | 3.3 ~ 3.6 | ||||||||
 |  |  |
| Cyfnewid Tabl ffibr optig tiwb torrwr tiwb ffibr torrwr tiwb laser ffibr torri | Tabl cyfnewid peiriant torri laser ffibr Clawr Llawn | Hybrid laser cymysg laser trawsbynciol peiriant Fiber |
 |  |  |
| Dur carbon metel Precision Uchel | Plât metel trwchus Big Power cnc ffibr | Taflen fetel gwerthu poeth |
GWELD MWY >>>>>
CYSYLLTWCH Â NI >>>>>
Deunyddiau Cymhwysol a Diwydiant:
Pen torri ffibr (Deunydd Metel):
Defnyddir yn bennaf ar gyfer torri dur carbon, dur silicon, dur di-staen, aloi alwminiwm, aloi titaniwm, dalen ddur galfanedig, bwrdd piclo, plât sinc alwminiwm, copr a llawer o fathau o dorri deunyddiau metel ac yn y blaen.
Pen torri ffibr (Diwydiannau Metel):
Cymhwysol mewn prosesu metel dalen, hedfan, hedfan gofod, electroneg, offer trydanol, rhannau isffordd, ceir, peiriannau, cydrannau manwl, llongau, offer metelegol, elevator, offer cartref, anrhegion a chrefftau, prosesu offer, addurno, hysbysebu, prosesu metel tramor amrywiol diwydiannau prosesu gweithgynhyrchu.
Pen torri CO2 (Deunydd Nonmetal):
Pren, bambŵ, articale jâd, carreg (dim ond ysgythru y gall), gwydr organig, grisial (dim ond ysgythru y gall), rwber, plastig, brethyn, lledr, ac ati.
Pen torri CO2 (Diwydiannau Nonmetal):
1. Hysbysebu: hysbysfwrdd, logo, arwydd, torri cymeriadau 3D, torri acrylig, sianel LED / neon, toriad twll llythrennol, llwydni blwch golau, stamp, llwydni, sêl, ac ati
2.Woodworking: MDF, llwydni pren, planciau pren, bambŵ, bwrdd dwysedd
3.Decoration: acrylig, gwydr organig, bwrdd lliw dwbl, cragen cnau coco, corn ych, bwrdd ABS, cysgod lamp, crefftau, grisial, gwydr, cerameg, carreg, cotio metel, ac ati.
4.Dillad: lledr, brethyn, texitle, esgidiau, ffabrig, ac ati.
1. Ansawdd Llwybr Ardderchog:Dot laser llai ac effeithlonrwydd gwaith uchel, o ansawdd uchel.
2. Cyflymder torri uchel:cyflymder torri yn 2-3 gwaith na'r un pŵer CO2 peiriant torri laser.
3. Rhedeg sefydlog:mabwysiadu laserau ffibr mewnforio byd uchaf, perfformiad sefydlog, gall rhannau allweddol gyrraedd 100,000 o oriau;
4. Effeithlonrwydd Uchel ar gyfer trosi ffotodrydanol:Cymharwch â pheiriant torri laser CO2, mae gan beiriant torri laser ffibr dair gwaith effeithlonrwydd trosi ffotodrydanol.
5. Cost Isel:Arbed ynni a diogelu'r amgylchedd.Mae cyfradd trosi ffotodrydanol hyd at 25-30%.Defnydd pŵer trydan isel, dim ond tua 20% -30% o beiriant torri laser CO2 traddodiadol ydyw.
6. Cynnal a Chadw Isel:trosglwyddo llinell ffibr dim angen adlewyrchu lens, arbed costau cynnal a chadw;
7. Gweithrediadau Hawdd:trosglwyddiad llinell ffibr, dim addasiad i'r llwybr optegol.
8.Mae'n cynnwys pen torri laser ffibr a phen torri laser CO2,mae'n ddewis da os oes gan eich deunyddiau gwaith fetel a nonmetal.
| 1 | Enw Peiriant | Peiriant torri laser ffibr |
| 2 | Model | LXF1325LC |
| 3 | Ardal torri peiriant laser | 2500x1300mm |
| 4 | Pŵer Laser Fiber Laser PowerCO2 | 500w/750w/1000W60/80/100/130/150/280/300W |
| 5 | Hyd tonnau laser | 1080nm |
| 6 | System drosglwyddo | Sgriw pêl wedi'i fewnforio |
| 7 | Cywirdeb lleoliad echel XY | ±0.01mm |
| 8 | Echel XY ailadrodd cywirdeb lleoliad | ±0.01mm |
| 9 | Cyflymder symud uchaf echel XY | 30m/munud |
| 10 | Cyflymder torri uchaf | 1–16m/munud |
| 11 | Torri trwch | Trwch metel mwyaf: Dur di-staen: 0.2-3mm Dur carbon: 0.2-12mm Trwch anfetel: Acrylig: 40mm pren haenog: 15mmMDF: 18mm (Yn ôl Pŵer manwl, rhestr dorri ynghlwm a ganlyn) |
| 12 | Deunydd Cais | Ffibr: Taflen fetel CO2: Nonmetal: Pren / MDF / Acrylig / Carreg ac ati. |
| 13 | Manteision | Ffibr ychwanegu arddull CO2 |
| 14 | Pwysau gros | 2200KG (Yn ôl cyfluniad manwl) |
| 15 | Pwysau net | 1800KG (Yn ôl cyfluniad manwl) |
| 16 | Maint peiriant | 4160 * 2190 * 1980mm (Yn ôl cyfluniad manwl) |
| Defnyddiau | Trwch(mm) | Math Nwy | 500W | 800W | 1000W |
| Cyflymder (m/munud) | Cyflymder (m/munud) | Cyflymder (m/munud) | |||
| Dur di-staen | 1 | N2 | 10 ~ 12 | 16 ~ 20 | 20 ~ 24 |
| 2 | N2 | 2 | 4.5 | 5.4 | |
| 3 | N2 | 0.7 | 1.7 | 2.2 | |
| 4 | N2 | 1.2 |
| Defnyddiau | Trwch (mm) | Math Nwy | 500W | 800W | 1000W |
| Cyflymder (m/munud) | Cyflymder (m/munud) | Cyflymder (m/munud) | |||
| Dur Carbon | 1 | Awyr | 8~9 | 7 ~ 10 | 9~12 |
| 2 | Awyr | 4~5 | 5~6 | 6~8 | |
| 3 | O2 | 2 | 2.3 | 3 | |
| 4 | O2 | 1.5 | 1.8 | 2 | |
| 5 | O2 | 1.2 | 1.5 | 1.6 | |
| 6 | O2 | 0.9 | 1.3 | 1.4 | |
| 8 | O2 | 1 | 1.1 | ||
| 10 | O2 | 0.6 | 0.9 | ||
| 12 | O2 | 0.7 |
| Deunydd | trwch mm | 80W | 100W | 130W | 150W |
| Cyflymder: mm/s | |||||
| Acrylig | 3 | 20-25 | 25-30 | 30-35 | 35-40 |
| 5 | 8-12 | 10-15 | 12-17 | 15-21 | |
| 8 | 5-9 | 6-10 | 8-12 | 10-15 | |
| 10 | 3-6 | 4-7 | 5-8 | 7-11 | |
| 15 | 1.5-3 | 2-4 | 3-5 | 4-7 | |
| 20 | 0.5-1.5 | 0.7-2 | 1-3 | 1.5-4 | |
| 25 | 0.2-0.5 | 0.3-0.8 | 0.41 | 0.8-1.8 | |
| 30 | / | 0.3 | 0.3-0.5 | 0.5-0.8 | |
| 35 | / | / | 0.2 | 0.1-0.4 | |
| 40 | / | / | / | 0.1 | |
| MDF | 3 | 15-20 | 18-23 | 20-25 | 25-30 |
| 5 | 10-13 | 10-15 | 15-18 | 18-21 | |
| 10 | 3.5-5 | 5-7 | 6-9 | 9-12 | |
| 15 | / | 2.5 | 3-4 | 5.5-7 | |
| 18 | / | / | / | 4 | |
| Pren haenog | 3 | 18-20 | 20-25 | 28-30 | 33-35 |
| 5 | 10-15 | 18-20 | 22-25 | 28-30 | |
| 10 | 6-8 | 10-12 | 13-15 | 17-20 | |
| 15 | 5-8 | 8-11 | 13-15 | ||
| Lledr | 1 | 25 | 25-30 | 35-40 | 40-45 |
| | |
| Cyfnewid Tabl ffibr optig tiwb torrwr tiwb ffibr torrwr tiwb laser ffibr torri | Tabl cyfnewid peiriant torri laser ffibr Clawr Llawn | Hybrid laser cymysg laser trawsbynciol peiriant Fiber |
| | |
| Dur carbon metel Precision Uchel | Plât metel trwchus Big Power cnc ffibr | Taflen fetel gwerthu poeth |
GWELD MWY >>>>>
CYSYLLTWCH Â NI >>>>>