Caution in the process of use fiber laser cutting machine

Caution in the process of use fiber laser cutting machine

1, please make sure that the power socket contact and good ground and reliable grounding.
2, please make sure that cold water machine the working voltage stability, normal!
Due to refrigeration compressor is more sensitive to the power supply voltage, our standard products of normal working voltage is 200 ~ 250 v, 110 v model is 100 ~ 130 v).If really need more wide working voltage range, can be customized.
3, power frequency mismatch would lead to machine damage!
Please according to the actual situation, the use of 50 hz or 60 hz.
4 and to protect water circulating pump, absolutely no water running!
New packing before emptying the water storage tank, please ensure that the tank affusion again after boot, otherwise the pump is easily damaged.When the tank water level below the water level gauge green (NORMAL) range, refrigerating capacity will be slightly lower cooling machine, please make sure that the tank water level in the water level gauge of green (NORMAL) range.Circulating pump drainage is strictly prohibited!
5, please make sure that cold water machine into the wind, the wind channel is smooth!
Cold water machine the outlet from the obstacles to have more than 1250 px distance, lateral the demands from tuyere away from obstacles in more than 500 px.
6, into the tuyere of the filter must be regularly clean!
Must unpick and wash regularly dustproof net, dust-proof net jam will cause cold water machine fault.
7, please pay attention to the influence of the condensation water!
When the water temperature is less than the environment temperature and environmental humidity is bigger, the circular surface will produce condensate water pipe and the cooling device.When the above situation, it is suggested that high temperature or for thermal insulation for pipe and the cooling device.
8, this product is a industrial equipment, do not let a non-professional operation.