CNC plasma cutting machine combines CNC cutting machine with plasma power source. It is easy to produce breakage by plasma cutting. There are many reasons for breaking. Generally, the optimal cutting speed range of plasma CNC cutting machine can be selected or used according to equipment descrip...
Many customers report noise, smoke, arc, and metal vapor when operating plasma cutting machines. The situation is particularly serious when cutting or cutting non-ferrous metals at high currents, causing environmental pollution. Most CNC cutting machine manufacturers participate in the water sto...
When cutting, the torch nozzle and the workpiece are kept at a distance of 2 to 5 mm, and the nozzle axis is perpendicular to the surface of the workpiece, and cutting is started from the edge of the workpiece. When the thickness of the plate is ≤ 12 mm,It is also possible to start cutting at an...
When the plasma arc is cut, the end face of the slit is slightly inclined, and the upper edge is round. Although the inclination range is allowed in the welding process, in order to improve the cutting quality, the problem has been caused by research. Under normal circumstances, appropriate redu...
1. Use a reasonable cut distance
The cutting distance must be according to the requirements of the manual. The cutting distance is the distance between the cutting nozzle and the surface of the workpiece. When piercing, use twice the distance of the normal cutting distance or the maximum height ...
Advantage:
1. Wide cutting area, can cut all metal sheets;
2. The cutting speed is fast, the efficiency is high, and the cutting speed can reach more than 10m/min;
3. The cutting precision is higher than that of the CNC flame cutting machine, the underwater cutting has no deformation, and the fi...
One of the necessary equipments for mechanical equipment processing is the CNC plasma cutting machine. It is the motion control of precision machinery through computer and servo system, so as to achieve the purpose of fast and accurate cutting of arbitrary graphics. CNC plasma cutting machine is...
1. In the process of using a plasma cutting machine, the flow rate of the air compressor used should be greater than 0.3 cubic meters per minute, and the working pressure range is between 0.4 and 0.8 MPa.
2. When cutting the plate with the arc starting, the arc starting should be started from th...
